Footrest Plates & Footrests

Hey, what projects are you planning or preparing for? CBX, other motos, workshop, WHATEVAH!
User avatar
RC 166
Forum Regular
Forum Regular
Posts: 102
Joined: Fri Dec 12, 2008 6:59 pm
Location: Varnamo, Sweden

Re: Footrest Plates & Footrests

Post by RC 166 »

bobcat,
Thanks, you are damn right! I did not design the bracket when the swingarm was at max top position. I get away fairly easy though.
Made a mock-up bracket and by lowering the MC ca 10mm and moving it forward by ca 20mm, I got a few mm clearance to the swingarm when in top position. Back to the drawing board and design a new bracket then... :techie-typing:



20240328_111131crop.jpg


20240328_111030crop.jpg
You do not have the required permissions to view the files attached to this post.
Own a one-man CNC shop, Building a CBX '79 with ZX-9R suspension and lots of nice custom CNC parts...
/ Peter

19Usacsprint
New Member & Happy To Be Here
New Member & Happy To Be Here
Posts: 2
Joined: Tue Apr 30, 2024 2:58 pm
Location: Modesto California USA
Location: Modesto California USA

Re: Footrest Plates & Footrests

Post by 19Usacsprint »

Would you be willing to make another set please. Thanks Jim

User avatar
RC 166
Forum Regular
Forum Regular
Posts: 102
Joined: Fri Dec 12, 2008 6:59 pm
Location: Varnamo, Sweden

Re: Footrest Plates & Footrests

Post by RC 166 »

Jim,
Sorry, did not see your post here immediately since I did not get any e-mail notification from the forum although I have ticked that box. Site technicians, can you fix this for me?

Once they are ironed out and I am happy with them, sure I can make a batch. But since my bike is not rolling I need to try them on the road on another bike first, making sure that everything is OK with riding position etc...

Unfortunately I have been off the project for a couple of months due to CAD- and CNC-work for customers. Soon able to look at the bike again between jobs...
Own a one-man CNC shop, Building a CBX '79 with ZX-9R suspension and lots of nice custom CNC parts...
/ Peter

Post Reply

Return to “Project Threads”